Magewell USB Capture DVI Plus

One-Channel HD DVI Video Capture Dongle

USB Capture DVI Plus
– Compact Video Capture Dongle
– Single Channel DVI Input
– Accepts HDMI, VGA and Component Signals
– Audio Line In / Line Out
– USB 3.0 Powered
–  Plug-and-Play

Convenient and simple to use, Magewell’s USB Capture DVI Plus is a video capture dongle that enables you to record or stream high-definition DVI video to your laptop or desktop computer. Connect HDMI, VGA or Component video signals up to 2K resolution to the DVI-I input via the supplied breakout cable. Additional 3.5mm Analogue Audio Line In / Out jacks give you the option of using a separate audio signal, instead of the HDMI embedded audio signal. The USB Capture DVI Plus also comes with a range of basic processing tools such as cropping, scaling, format and frame rate conversion etc.



Magewell USB Capture dongles are powered via the same USB 3.0 cable that transmits captured video to your computer, thus removing the need for a bulky external power supply unit. They also utilise existing USB drivers installed on your system, thus enabling Plug-and-Play capability across Windows, Mac and Linux operating systems.

USB Capture DVI Plus_2


Input Interfaces:



Output Interfaces:


Host Interfaces:


Input Features:





Video Capture Formats:




Processing Features:





Multi-Card Installation:

Capture Streams:

Low Latency:





LED Indicators:

Physical Profile:


Accessories Included:

1x DVI-I (Supports HDMI, VGA, Component Signals)

1x 3.5mm TRS unbalanced Line In


1x 3.5mm TRS Stereo unbalanced Line Out


1x USB 3.0


– Adaptive Cable Equaliser for HDMI cables up to 30m

– Support for 2K mode

– 4:4:4, 4:2:2 colour sampling at 8/10/12 bits

– 225 MHz HDMI Receiver


– Capture up to 2048×2160

– Frame Rates up to 120 fps

– 4:4:4, 4:2:2 colour sampling at 8 bits


– Cropping, Scaling

– Deinterlacing

– Aspect Ratio, Colour Format & Frame Rate Conversion

– Video OSD Composition


Supports multi-dongle usage in one system

Unlimited Capture Streams per channel

64 Video Lines


– Signal Status Extraction

– Capture Configuration


Status LEDs per channel

USB 3.0 (Supports USB 2.0)


– USB 3.0 Cable

– DVI-VGA Connector

– DVI-I to HDMI + Component breakout cable

– DB-9 to S-Video + Composite + Component breakout

Need a Video Capture Device for your Next Project?

Contact us Now!